Installation Template

2 5/8”

1/2”

C/L DOOR EDGE

POCKET TRIM

MORTISE TRIM SIDE

1 7/8” DIA. HOLE 7/8”

BELOW LOCK C/L

DOOR EDGE FINGER PULL

1” DIA. 7/8” DEEP

LOCK CASE

LOCK FACEPLATE

LOCK STRIKE

MORTISE 1/2” WIDE

X 4” HIGH X 2 3/4” DEEP

POCKET FOR LOCK CASE

5/8” DIA. X 3/32” DEEP

X 6 5/16” HIGH

3/4” ABOVE LOCK C/L

11/16” DIA. x 3/32” DEEP

X3 9/16” HIGH

INSTALLATION TEMPLATE FOR OMNIA #3910 & #3911 POCKET DOOR LOCK

Ph: 973.239.7272 F: 973.239.5960

OM-3910/3911

01/31/12

www.OmniaIndustries.com

NOTE: Template may not be

true-to-size. Please use for reference

purposes only. Do NOT drill until

measurements are verified.

1 3/8”

PAGE 1
INSTALLATION TEMPLATE FOR OMNIA #3910 & #3911 POCKET DOOR LOCK DOOR EDGE FINGER PULL 1” DIA. 7/8” DEEP 2 5/8” LOCK CASE MORTISE 1/2” WIDE X 4” HIGH X 2 3/4” DEEP POCKET FOR LOCK CASE C/L DOOR EDGE 1 3/8” LOCK FACEPLATE 5/8” DIA. X 3/32” DEEP X 6 5/16” HIGH POCKET TRIM LOCK STRIKE MORTISE TRIM SIDE 1 7/8” DIA. HOLE 7/8” BELOW LOCK C/L 3/4” ABOVE LOCK C/L 11/16” DIA. x 3/32” DEEP X3 9/16” HIGH NOTE: Template may not be true-to-size. Please use for reference purposes only.