Door Template

TEMPLATE FOR PRIVACY BOLT

No. OM-PBT1212

Fold template on this dotted line

and place on the door edge.

Backset 60mm = 2-3/8”

Backset 70mm = 2-3/4”

Drill 1” (25 mm) dia. back bore

hole on the center of door edge.

NOTE: Template may not be true-to-size.

Please use for reference purposes only.

Do NOT drill until measurements are verified.

1-3/8” thick door

1-3/4” thick door

Face Plate: 2-1/4” x 1” x 5/32”

Strike: 2-3/4” x 1-1/8”

1-3/4” thick door

1-3/8” thick door

3/4” bore

www.OmniaIndustries.com

Ph 973.239.7272 F 973.239.5960

PAGE 1
TEMPLATE FOR PRIVACY BOLT DOOR EDGE 1-3/4” thick door 3/4” bore NOTE: Template may not be true-to-size. Please use for reference purposes only. Do NOT drill until measurements are verified. 1-3/8” thick door 1-3/4” thick door Drill 1” (25 mm) dia. back bore hole on the center of door edge. Backset 60mm = 2-3/8” DOOR EDGE Backset 70mm = 2-3/4” Face Plate: 2-1/4” x 1” x 5/32” Strike: 2-3/4” x 1-1/8” 1-3/8” thick door Fold template on this dotted line and place on the door edge. www.