User's Manual

Omnia 4.5 Use and Installation Guide – Ver 1.00a
60
60
AGC Mixer (Mix)
AGC Mixer Submenu
This is where the output of the two AGC's are mixed together. Use care in adjusting this section, as too
much level from one particular band may cause an excessive amount of emphasis to that range of
frequencies. Such adjustment may also drive the limiter bands in that range of frequencies too hard, causing
the sound to become unnatural, dense, and squashed. If your desire is to “EQ” the sound, you should
perform that function using the drive levels in the AGC or Limiter XO Parameter Windows. The AGC
mixer is primarily intended for minor “EQ” changes to the overall sound.