User's Manual

Connector: EMI-suppressed RJ-45 female pinned according to StudioHub+®
standards. Transformer isolated, balanced, and floating according to AES3
standard.
Digital Audio Output: Stereo per AES3 standard. Digital Output sample rate software
selectable for internal 48kHz, synchronize to AES input, or synchronize to
auxiliary AES sync input (per AES-11 / DARS).
Connector: EMI-suppressed RJ-45 female according to StudioHub+® standards.
Transformer isolated, balanced, and floating according to AES3 standard.
Digital Output Level: -22.0 to 0.0 dBFS peak, software adjustable in 0.1dB steps.
Digital Sync Input: Output sample rate can be synchronized to the signal present on the
AES/EBU input or to the AES3 signal applied to the Ext. Sync connector.
External Sync Range: Accepts 32kHz to 96 kHz for synchronization of the Digital Output
signal to an external reference. Automatically accepts sample rates
between 32kHz and 96kHz.
Connector: EMI-suppressed RJ-45 female pinned according to StudioHub+®
standards, Transformer isolated, balanced, and floating according to AES3
standard.
Remote Control: 10/100BaseT Ethernet: standard web-based protocol and additional
TCP/IP connections.
Direct Serial: RS-232 at 9,600, 19,200, or 57,600 baud (no handshaking);
Hayes command set compatible external modem.
Connectors: RS-232 port - EMI-suppressed DB-9 female connector.
Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface: Configuration: Four fully optoisolated inputs.
Software sensing of both 'go-high' and 'go-low' transitions.
Inputs are protected to 2000 V AC/DC.
Connector: EMI suppressed DB-9 male.
Control: User-programmable using built-in Trigger Script feature in included
OmniaONE Remote Control software. Virtually any parameter of the
OmniaONE may be programmed through this interface feature.
Power Requirements: Voltage: 100-250 VAC, 47-63 Hz. Less than 25 VA.
Power Connector: EMI suppressed IEC male.
Detachable 3-wire power cords supplied for US and European use.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
54