Operation Manual
www.omni-fitness.eu
26
ASSEMBLING THE FITNESS EQUIPMENT
a. Before you starting assembling the equipment, you
should allow it to acclimatise at room temperature
for one to two hours.
b. Choose a space on the oor or a workbench where
you have sucient freedom of movement to assem-
ble the tness equipment. To avoid damage to the
ooring, always assemble the exercise equipment on
a suitable underlay such as a piece of cloth or a mat.
The device should always be placed on a suitable un-
derlay, mat etc. during use/exercise to avoid damage
to the ooring.
c. Remove all parts from the transport packaging and
remove all protective lms, transport straps, and
belts. Caution: Avoid protective foils from becoming
a deadly trap for children (danger of suocation!).
d. Lay out all the parts in the correct order and check
the parts list to make sure that you have all the parts,
screws, and other components.
e. If parts are missing or damaged, please contact our
service team directly on:
+49 (0) 1805 / 346412 Mo - Fr 9.00 a.m. - 6.00
p.m. (CET/CEST) (14 Ct./min. for calls from Dt. Tel-
ekom landline in Germany. Max. charge of 42 cents/
minute applies to calls from mobile networks. Calls
from abroad may vary).
Article number: OM2063CA
net weight: 94 kg
Dimensions (approx.): 178 x 88.4 x 131 cm (LxWxH)
Dimensions
(approx.) (folded): 110 x 88.4 x 150 cm (LxWxH)
Max. user weight: 130 kg
Test standards: EN-957-1/6, Class H/C
Motor: Peak output 3.5 HP/Constant 2 HP 1300 Watts
Speed: 1-18 km/h
Tilt adjustment: 0-15%
Noise emissions: The treadmill complies with all noise emission requirements. Noise
emissions are below 70 db during normal operation.
TECHNICAL SPECIFICATIONS
f. If you experience diculty setting up or commis-
sioning your equipment, our service department
will be happy to help you! In most cases, problems
have simple causes and can easily be resolved over
the phone, even if technical complex devices are
concerned.
OM2063CA Instructions manual Treadmill OMR 5.0 .indd 26 30.01.2012 16:28:57