User Manual

4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
OMNIVISION reserves the right to make changes to their products or to discontinue
any product or service without further notice. OMNIVISION and the OMNIVISION logo
are trademarks or registered trademarks of OmniVision Technologies, Inc.
All other trademarks are the property of their respective owners.
3
Typical Application
Pin Description
Pin Number
Symbol
I/O
Description
1
GND
--
Ground.
2
VIN
I
Switch input. Place ceramic bypass capacitor(s) between this
terminal and GND.
3
NC
--
Not connected.
4
VOUT
O
Switch output. Place ceramic bypass capacitor(s) between this
terminal and GND.
5
VBIAS
--
Bias voltage. Power supply to the device.
6
ON
I
Active high switch control input. Do not leave floating.
Block Diagram
WS4667E
2022/1/4 - Rev. 0.5