User Manual

0X05B1S
Applications
• active array size: 2592 x 1944
• maximum image transfer rate:
- 1944p: 60 fps
• power supply:
- analog: 2.8V
- digital: 1.2V
- I/O pads: 1.8V
• power requirements:
- active: 290 mW (estimated)
- XSHUTDOWN: 10 mW (estimated)
• output interfaces: up to 4-lane MIPI
CSI-2, 10-bit DVP
• temperature range:
- operating: -40°C to +105°C sensor
ambient temperature and -40°C to
+125°C junction temperature
• lens size: 1/2.53"
• lens chief ray angle: 26°
• output formats: linear output
• pixel size: 2.2 µm x 2.2 µm
• image area: 5737.6 µm x 4312 µm
• support for image size: 2592 x 1944
and any cropped size
• data format: RAW RGB-Ir
• 2.2 µm x 2.2 µm pixel with
PureCel®Plus-S, Global Shutter,
and Nyxel® technologies
• image sensor processor functions:
- defective pixel cancellation
- automatic black level correction, etc.
• dedicated safety features for
supporting ASIL-B applications
• high speed serial data transfer
with MIPI CSI-2
• (RGB-Ir, lead-free)
89-pin a-CSP™ packed in tray without protective film
• parallel 10-bit DVP output
• external frame synchronization
capability
• SCCB for register programming
• embedded temperature sensor
• embedded supply voltage monitor
• one time programmable (OTP)
memory
• cybersecurity for camera /
host interface hacking prevention
Technical Specifications
Functional Block Diagram
Product Features
Ordering Information
Version 1.0, January 2022
4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
OMNIVISION reserves the right to make changes to their products or to discontinue any
product or service without further notice. OMNIVISION and the OMNIVISION logo are
trademarks or registered trademarks of OmniVision Technologies, Inc. Nyxel is a registered
trademarks of OmniVision Technologies, Inc. a-CSP is a trademark of OmniVision
Technologies, Inc. All other trademarks are the property of their respective owners.
• Automotive:
- Autonomous driving
- Driver monitor system
- Occupant monitor system
- In-cabin monitor system
OX05B1S
output interfaceimage signal processingimage sensor core
column
ADCs
BLC,
DigGain
temp
sensor
temp
sensor
analog
gain control
security
IP
row select
FIFO
MIPI
PLL1
PLL2
OTP
(sensor)
voltage
monitor
OTP
(crypto)
SCCB
interface
timing generator
and system control
XVCLK
TM
RESETB
GPIO0-6
VSYNC
INTR
VMERRB
FSIN
1.1V
1.8V-3.3V
2.9V
SID
SCL
SDA
image
array
white balance gain,
DPC (OTP+Dyn),
window, binning
MIPI/
DVP/
PLL3