User's Guide

9
DO007269-02 Sense Shield User Guide
4. Battery Replacement
Sense Shield uses a CR2032 battery that can be replaced.
WARNING Only a CR2032 battery should be used with this device. Failure to use a
CR2032 battery may result in a malfunction or damage to the battery or device.
4.1. Remove the battery
To Remove the battery:
1. Unscrew the case upper and remove from the case lower (Fig 1).
2. Carefully lift the battery from opposite side to the metal clip and slide battery
out from battery holder (Fig 2), take note of the correct battery polarity.
Fig 1 - Sense Shield with Lanyard Clip shown for illustration purposes
Case Upper
Case Lower