Sense Asset User Guide Sense Asset User Guide
Revision History Date 28-07-2021 Version 02 Sense Asset User Guide Notes Updated Doc Author WND
Introduction Congratulations, you are now the proud owner of the Sense IoT Bluetooth Technology Evaluation Kit that will help supercharge your IoT projects. The IoT devices in this kit are called Sense Asset. As well as harnessing the power of Bluetooth Low Energy (BLE) these intelligent devices include an accelerometer.
Table of Contents 1. Tag Operation ..................................................................................................... 5 1.1. Activating the Sense Asset ............................................................................... 6 1.2. Sense Asset 2D barcode .................................................................................. 6 1.3. Sense Asset NFC Configurable Settings .......................................................... 6 2. Product IO Settings ..........
1. Tag Operation Sense Asset is designed for tracking and monitoring applications over BLE on a Quuppa Intelligent Locating System. Sense Asset is pre-programmed with Quuppa firmware and is equipped with an accelerometer and an LED light to indicate device status.
1.1. Activating the Sense Asset Before using the Sense Asset you must activate and configure it for your Quuppa Intelligent Locating System. 1. Press the button for 1 second to wake the Sense Asset (Quuppa) from storage state. 2. Within 30 seconds, send a configuration command to the Sense Asset (Quuppa) from the Quuppa Site Planner (QSP) and add the tag to the project. For details, see instructions on Quuppa tag configuration from the Quuppa Customer Portal (QCP). 1.2.
3. Sense Asset product range There are a number of product variants within the Sense Asset Product range all of which are based on the primary product, these are summarised in the table below. Part Number Part Name (Model) Description CP14886 Sense Asset Primary SKU CP15632 Sense Asset Temp Greater operational temperature range than standard product.
4. Fitting instructions for the Sense Asset First ensure that the mounting surface is clean and free from debris, remove any dirt using the cloth. IMPORTANT For optimal operation do not attach Sense Asset onto a large metallic surface. IMPORTANT Avoid attaching Sense Asset in a way that the button is permanently pressed down. 5. Maintenance for the Sense Asset The Sense Asset is a sealed unit and requires no maintenance during its life span. 6.
FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for an Intentional radiator, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
11. Recycling and Disposal Always return your used electronic devices, batteries and packaging materials to dedicated collection point. This way you help to prevent uncontrolled waste disposal and promote the recycling of materials. Disposal of Electrical and Electronic Equipment. This crossed-out wheeled-bin symbol indicates that this product should not be treated as household waste.
