Indoor Fireplace User Manual

Optional Equipment (for qualified installers only) 63
© Travis Industries 4090507 100-01217_000
Installation
WARNING: Make sure power to the fireplace has been shut off prior to installation.
NOTE: Refer to the wiring diagram on page 62 while making wiring harness connections.
1 Remove the concealment cover from the front of the fireplace (see Figure 1).
Figure 1
2 Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove the
control cover (see Figure 3)
Figure 2
Figure 3
3 Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapter
plugged into the wiring harness.
Figure 4