Indoor Fireplace User Manual

52 Finalizing the Installation (for qualified installers only)

LP Conversion Instructions

Install the conversion kit prior to installing the gas line to ensure proper gas use.

1 Remove the glass (see page 38). Remove the logs and embers (if installed - page 42).

2 Remove the grate , firebacks, and center burner (see illustration below).

1/4" Nutdriver

Remove the grate from both sides.

NOTE: lift the burner to remove the grate.

Remove the log shelf

Four screws hold the center

burner in place. Slide the

burner to the right and up to

remove.