User's Manual

WiPort Data Sheet
WiPort Pin Functionality
Pin Number WiPort Pin Function
1 3.3V Power
2 3.3V Power
3 RTS0
4 TXD0
5 RXD0
6 Configurable Pin 2
7 Configurable Pin 3
8 CTS0
9 Configurable Pin 10
10 Configurable Pin 8
11 Signal Ground
12 Signal Ground
13 Reset In
14 Configurable Pin 0
15 RTS1
16 TXD1
17 RXD1
18 Configurable Pin 9
19 Configurable Pin 4
20 CTS1
Pin Number WiPort Pin Function
21 Reserved
22 Reserved
23 Signal Ground
24 Signal Ground
25 Reserved
26 Reserved
27 Ethernet Status LED2
28 Ethernet Status LED1
29 Ethernet TX-
30 Ethernet TX+
31 Ethernet RX Center Tap
32 Ethernet TX Center Tap
33 Ethernet RX-
34 Ethernet RX+
35 Configurable Pin 1
36 WLAN Power LED
37 Configurable Pin 6
38 Configurable Pin 5
39 WLAN Activity LED
40 Configurable Pin 7
Mating Connector Description
Recommended: Samtec FTMH-120-03-F-DV-ES
(shrouded header)
Alternative: Samtec FTMH-120-03-F-DV
(not shrouded)
Alternative: Oupiin 2411-2X20GDN/017 (not shrouded)
The mating
connector is a 1mm
micro header,
40 pins, 2 x 20.
WiPort Wireless Specifications
Category Description
Network Standard IEEE 802.11b
Frequency Range 2.412 – 2.484 GHz
Antenna Connector 1, no diversity supported.
Data Rates 1,2,5.5,11Mbps(802.11b HR)
Number of Selectable
Subchannels
14 channels
Modulation DSSS, DBPSK, DQPSK, CCK
Radio
Antenna Connector 1
Security WEP 64/128, TKIP
Maximum Receive Level -10 dBm (with PER < 8%)
Receiver Sensitivity -82 dBm for 11Mbps
-87 dBm for 5.5Mbps
-89 dBm for 2.0Mbps
-93 dBm for 1.0Mbps
WLAN Power and Link LED
Current
Max: 4 mA