User's Manual

Operating Tips
21
sound a constant tone and illuminate the Low Battery
Indicator LED (see Sec. 3) for 5 seconds, then the
system will automatically power Off.
Problem: OmiDetect will not power On.
Possible solution: The tool’s internal 9 volt alkaline
battery may be low and need to be replaced (see
above).
10. Care and Maintenance
Your OmiDetect system should be cared for like any other
piece of high-quality electrical equipment.
To maintain the condition and serviceability of the system,
you should periodically inspect and clean all the system
components as necessary.
Never spray any liquid directly on the system. Instead,
moisten a soft cloth with water and a mild cleaning agent
like window cleaning solution, then wipe the units clean.
The system’s internal 9 volt battery should be removed if
the system is not used for extended periods.
Use only a standard 9V alkaline battery when replacing it.
The system does not need any adjustments or calibration.
11. Warranty
The OmiDetect 50 TPM Sensor Tester has a one-year warranty
against defects in workmanship and materials (excluding batteries).
Any defective item returned within this time showing signs of abuse,
tampering, neglect or misuse will be repaired at normal time and
material costs.
12. Technical Support
Technical support is available from Monday through Friday from
8:00 a.m. to 5:00 p.m. EDT by calling OmiDetect Technical Support
toll-free at 1-800-434-6744 or by emailing
techsupportusa@omitec.com.