Owner's manual

Table 7.1 Factory Preset Values (continued)
Analog Output Retransmission
Retransmission Enabled C
Voltage/Current Voltage C
Input Low 0 C
Output Low 0.00 C
Input High 1000 C
Output High 10.00 C
Monitor
Scrolling R
W
End Device ID - -
Permanent Store 0
W
Transmit Power
PID (Network ID) 13106 (version x.x) W
Channel 12 W
Transmit Power Range 20 dBm W
Misc
iSeries Firmware Ver x.x - -
NETWORK SETUP
General
Secured Applet 0
E
Title zSeries E
Terminal Server
TCP/IP TCP E
Server Type Command E
Forward CR Enable E
Number of Connections 1 E
Port 02000 E
Remote Access (Tunneling)
Remote IP Address 0.0.0.0 E
Remote Port 02000 E
Remote Access Disable E
Access Control
Login Password 12345678 E
Admin Password 00000000 E
Host name wisxxxx -
MAC Address: 00:03:34:00:xx:xx -
IP Address 192.168.1.200 E
Gateway Address 0.0.0.0 E
Subnet Mask 255.255.255.0 E
68










