Owner's manual

33
4.3.6 Setup
This section is used to configure the wiDR online. Click on the specific settings to
change the parameters on that section
4.3.6.1 Input
Control End Device ID: Insert the End Device ID number that will be used as
input to control
Filter: This option allows the user to specify the number of readings stored in
the Digital Averaging Filter. Choice of: 1, 2, 4, 8, 16, 32, 64, 124.
Temperature Unit: Unit of temperature readings, [ ºC or ºF ].
Figure 4.12 Input
Temperature Unit
F
Filter
4
Control End Device ID:
for Retransmission and On/Off
5
Main Menu
SETUP
Input
SETUP
http://192.168.1.200Address
Cancel
Update