Owner's manual

3.5.2 Changing TCP/IP Properties on Your Computer
Go to your computer’s Control Panel then Network Connections.
Pick the network with the proper Ethernet card. Right click and choose
Properties
Figure 3.3 Network Connections
Setup the IP address (in this case, 192.168.1.1) as shown below and press OK
.
Figure 3.4 Network Connections
18
Look for Internet Protocol Version 4
(TCP/IPv4), click on it and press
Properties
You can access the Coordinator’s web
server via any internet browser using IP
address of 192.168.1.200.
Once you log into the
Coordinator’s web
server, you will be able to change its IP
configuration according to Section 4.2.
After you configure the
Coordinator’s IP configurations,
you should go back and set your
PC’s previous IP settings.