Owner's manual

2.1.4.2 Antenna Mounting Instruction

For best reception: connect the antenna directly to the wiDR, if the device is not

installed in a metal panel or enclosure.

If the wiDR is behind a metal panel or in a cabinet, use a coaxial cable to

position the antenna outside outside of the enclosure in the open air.

Use the shortest cable that can reach a suitable location. The antenna on this

wiDR and any End Devices should be installed in a vertical position, pointing

towards the sky.

Metallic structure should be kept at least 0.8” (2 cm), although 2.4” (6 cm)

is recommended away from the antenna.

Any casing that encloses the antenna should be plastic. In addition, it is

also wise to avoid plastic case with dark fillers or colorants.

Refer to Section 5 for more Environmental / Operating Conditions.

Figure 2.5 Antenna Mounting