Owner's manual

2.1.2 Front Panel

The front panel connections are shown in Figure 2.2.

Figure 2.2 Front Panel Power and Output Connections

Table 2.1 Front Panel Connector

POWER AC/DC Power Connector: All models

OUTPUT 1 Based on one of the following models:

Relay SPDT

Solid State Relay (SSR)

Pulse

Analog Output (Voltage and Current)

OUTPUT 2 Based on one of the following models:

Relay SPDT

Solid State Relay (SSR)

Pulse

Network Communication Interface Section:

ETHERNET RJ45 interface for 10BASE-T connection.

RESET Button: Used for power reseting the Ethernet board.

ACTIVITY LED (Red) Blinking: Indicates network activities (receiving or

sending packets).

NET LINK LED (Green) Solid: Indicates good network link.

TX LED (Yellow) Blinking: Indicates transmitting data to the serial port.

RX LED (Green) Blinking: Indicates receiving data on the serial port.