Owner's manual

Chapter 2: Installation and Configuration
22
PDL-DIO and PDXI-DIO Series
The PDL-DIO-STP-64 is a 64-channel screw terminal panel, which also
includes connections for the counter timers, high speed IRQ and ESSI
ports. This STP panel utilizes 96-way Fujitsu connector for the
connectivity with PDL/PDXI DIO board DIO lines.
Figure 5: PDL-DIO-STP-64 Wiring Diagram
Connections on the Figure 5 applied to the PDL-DIO/PDXI-DIO series.
Connections made via PD2-DIO-CBL-16 are optional and this cable must
be used only if counter/timers or high-speed IRQs intended to be used.
PD2-DIO-CBL-26 is also optional and must be used only if ESSI
subsystem operation is considered by customer application.
Also, there is a combo solution available for the PDL-DIO board, when
two cables, PD2-DIO-CBL-26 and PD2-DIO-CBL-16 are replaced by one
cable/bracket solution: PDL-DIO-CBL-37.