Owner's manual

Chapter 2: Installation and Configuration
21
Screw Terminal Panels
PD2-DIO Series
The PD2-DIO-STP-64 is a 64-channel screw terminal panel, which also
includes connections for the counter timers, high speed IRQ and ESSI
ports.
Figure 3 shows the typical connections between the PD2-DIO and PD2-
DIO-STP-64 terminal panel. Note that for 128-lines board one extra
PD2-DIO-STP-64 and PD-DIO-CBL-100 is required. Connections made
via PD2-DIO-CBL-16 are optional and this cable must be used only if
counter/timers or high-speed IRQs intended to be used. PD2-DIO-CBL-
26 is also optional and must be used only if ESSI subsystem operation is
considered by customer application.
Custom terminal panels are available. Please contact your distributor or
the factory.
Figure 4: PD2-DIO-STP-64 Wiring Diagram