Owner's manual

Chapter 2: Installation and Configuration

Also separate cables PDL-DIO-CBL-16 (J3) and PDL-DIO-CBL-26 (J4)

may be used for the cost and/or space sensitive applications. In this

case cables may be pulled through the hole in the PCI bracket. To do

so, please unscrew the bracket, put the cables through the rectangular

hole in it and screw the bracket back to the board.

PDXI-DIO Series

The J1 connector uses a 96-way 1-meter round shielded high-density

cable (PN PDXI-CBL-96).

The J3 and J4 connectors uses specially designed splitter cable that

brings signals from those two connectors through the hole in cPCI

bracket, back to 14 (J3) and 26 (J4) connectors on the PDXI-DIO-STP-

64 (PN PDXI-DIO-CBL-37)