Owner's manual

QUICK-START GUIDE
OSXL-TIC101
OSXL-TIC102
OSXL-TIC103
OSXL-TIC104
Flip-up LCD
Keypad
Battery
Compartment
Torch (Flashlight)
(OSXL-TIC102,
103, 104)
Visual Camera
(OSXL-TIC102,
103, 104)
IR sensor & lens
Laser pointer
Lens Cap
Definable trigger
Become familiar with your camera’s basic functions.
CAMERA OVERVIEW
1. CHARGING THE BATTERY
a. Position the battery in the compact battery charger so the
contacts nearly touch. Push the battery forward until it snaps
into place.
b. Plug one end of the power cord into the charger and the other end into a 110VAC
outlet.
•Thelightonthechargerwillglowredwhilethebattery is charging. It will turn
green when charging is complete.
•Aftercharging, unplug the battery charger and remove the charged battery.
2. INSTALLING A CHARGED BATTERY AND MINI SD CARD
To install a battery:
a. Release the battery compartment latch by pushing it down and forward (see arrow
in left figure below). Lift and remove the battery compartment cover.
b. Align the battery’s edge with the line inside the compartment. Push the battery
forward until it click-locks (see arrow in right figure below). Replace the battery
compartment cover and latch it.