Specifications Sheet

NB: Drawings are not to scale - they are to assist only. WARNING: technical specifi cations and product sizes can be varied by the manufacturer without notice. Cut-outs for appliances should only be by physical product measurements. The above information is indicative only.
Key features
Benefi ts
Omega Rangehoods
Technical details
Profi le type: Canopy
Size: 90cm
Installation type: Wall mounted
Airfl ow: 914m³/hr NET
Number of motors: 1
Watts of motor: 265W
Speeds: 3
Carbon fi lter: Included (ORCF152)
Filtration: 3 aluminium, removable and
washable fi lters
Lighting: 7W LED strip
Noise level (DB): 53-67dBA
Air extraction: Ducted or recirculating
Maximum current: 10amps 3 pin plug
Connection: 220 - 240V, 50Hz
Warranty: 24 months parts and labour
Aesthetics
Finish: Brushed stainless steel
Chimney Extension: No
Control type: Push buttons
Dimensions/weight
Overall dimensions (mm): 1225h x 900w x 500d
Chimney height (mm): 500-980mm fully extended
Flue diameter: 150mm
Net weight: 14kg
ORC92X
Omega 90cm canopy rangehood with LED lighting and brushed stainless steel fi nish.
LED lighting
LED lights only use a small amount of energy saving you money on your electricity bill. LED lights
generate little heat and last a very long time.
Recirculation
optional
A recirculating rangehood draws the air inside the appliance, cleans it and pushes it out through the
chimney fl ue. Because there is no ducting required, these rangehoods are very easy to install.
High air fl ow
Omega high air extraction rangehoods typically draw more than 780m³ of air per hour keeping your
kitchen smoke free.
Page 9
Updated: 07/12/2017