User Manual

13
Adjusting beep volume
To adjust beep volume, press “+” and “-” together. Then press the central button and wait for “ton1” (high
volume) to flash. Press “-” to select “ton2” (medium volume) or “ton3” (low volume).
Press the central button to set the selected volume.
INSTRUCTIONS FOR USE Cont.
Setting an oven function manually
Turn the mode knob into the desired position, the clock display shows On for a few seconds. The oven will
work for a maximum time (12hours). Depending on the oven model, the number and type of available
functions can be different.
If the selected function works using any heating elements, the symbol is displayed (it doesn’t appear in light
and defrost position).
Turn the Temp & Time selector and set the desired oven temperature.
The control offers a PRESET temperature per every cooking mode or a full range between MIN and MAX to
be adjusted by hand. Check the value on the display after having selected the temperature.
The temperature appears on the clock display for about 5 seconds when the Time & Temp selector is pushed
or when a new function has just been selected.
As soon as the oven starts, the preheat led (indicated by the bars) on the left side of the clock display starts
flashing and becomes steadily on when the preheat ends.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will show OFF for a few
seconds.
Setting an automatic oven function
After having selected a function as described before, the control can be programmed in order to set timed
cooking activities. The time program remains active even if the function is changed .The following possibilities
are available:
1. Timed cooking setting the cooking time (duration).
2. Timed cooking setting the end of cooking time (stop time).
3. Delayed cooking setting duration and stop time. Push the knob in order to toggle between cooking duration
(cook time) and end of cooking time (stop time): the words “dur” or “End” are displayed respectively. Turn the
knob left/right to edit the duration or the stop time when the proper word is displayed.
4. When the word dur is displayed, the control shows 30’ as the standard cooking duration.
Turn the knob left/right in order to set the actually desired cooking time in a range between 0 and 240
Minutes. The display will flash dur and its value alternatively for a few seconds then it will show the time of
day, the pot symbol and the letter to indicate that a timed cooking is active. The end of cooking time is
updated automatically.
5. When the word End is displayed, the control shows the current time as the initial stop time. In order to set
the actually desired end of cooking time in a 24 hours range:
- Turn the knob left/right, the hours flash.
- Modify the flashing hours value turning the knob left/right.