Owner's manual

Temperature/Pressure Adapter
9
Press
STATUS
or
RECORD
to scroll through
the print options until this display appears.
Press
MENU
ENTER
to advance to the next print
selection.
This is the first filter option. Selecting this will
print every data sample that has recorded
data.
Press
STATUS
to select a temperature filter
function, from 1° to 10° can be selected as a
filter function.
or
Press
RECORD
to select a pressure filter
function, from 1 to 10 PSI or 0.0 to 1.0 BAR can
be selected as a filter function. Then press
MENU
ENTER
to continue.
If
MENU
ENTER
is pushed, the Service logger will
return to the operating mode.
If
STATUS
is pushed, the printing will begin
and
the flashing dots indicate printing functions.
When the Service Logger is finished printing it will return to the Operating Mode.
Printer Error Messages
If a printer is not connected and set to operate, an error message will be
displayed to alert the user to a printer problem.
There are several possible problems that may occur if the printer is not ready.
The Service Logger will alert the user to a problem with the printer. As each
printer has its own set of controls and settings, the user is recommend to con-
sult the owners manual supplied with the printer.
SEND RECORDED
DATA TO PRINTER
SEND OUT ALL OF
THE TEMP DATA
SEND TEMP ON
X DEGREE CHANGE
SEND PRESSURE
ON X PSI CHANGE
PUSH ^ START PRT
PUSH MENU QUIT
PRINTING
PLEASE WAIT…