Owner's manual

Temperature/Pressure Adapter

CHANGING SCALE TO °F OR °C

Press the

ENTER

button until the display

reads:

Use the

STATUS

RECORD

buttons to

change the setting to the desired scale.

When the

ENTER

button is pressed three more times (to cycle through the

remaining functions), the temperature scale setting will be saved into memory

and the Service Logger will return to the operating mode. Otherwise the unit will

return to the operating mode after approximately 1 minute and changes will be

saved into memory.

Changing Scale to PSI or BAR

Press the

ENTER

button until the display

reads:

Use the

STATUS

RECORD

buttons to

change the setting to the desired scale.

When the

ENTER

button is pressed twice more (to cycle through the re-

maining functions), the temperature and pressure scale setting will be saved

into memory, and the Service Logger will return to the operating mode. Other-

wise the unit will return to the operating mode after approximately 1 minute and

changes will be saved into memory.

TEMPERATURE SET

TO FAHRENHEIT

TEMPERATURE SET

TO CELSIUS

PRESSURE SCALE

IS SET TO PSI

PRESSURE SCALE

IS SET TO BAR