Owner's manual

Temperature/Pressure Adapter

TRANSFERRING DATA TO A COMPUTER

After a recording has been made, the user may download the data to any PC

compatible computer. The advantage of doing this is that it allows the use of

more sophisticated analysis tools as well as a long term storage. Unlike the Print

and View functions no filtering options are available in this mode. The entire re-

cording is sent to the computer. The supplied software will convert the data re-

cording to an ASCII file which can then be imported into a variety of data analy-

sis software, word processing, and data base programs. It is suggested that if

the user plans to download recorded data on a regular basis to copy the trans-

fer program to the users hard disk.

To start the transfer program insert the supplied diskette in drive A. Type

“A:SUPCO” and follow the instructions on the computer screen. A README file

is also included on the floppy diskette which has detailed instructions on the

use of the transfer program and reflects the latest information that is not in-

cluded in this manual.

IMPORTANT!

To use this function the 25 pin cable (DB25 Male-Male) must be connected

to the Service Logger and the PC compatible computer printer port. If you

are unsure of which connector is the printer port, consult the owners man-

ual which was supplied with the computer.

The computer transfer cable can be purchased from OMEGA as part # OM-

CC6.