Owner's manual

Temperature/Pressure Adapter
11
Press
MENU
ENTER
to advance to the next display selection.
This is the first filter option. Selecting this will
print every data sample that has been recorded.
Press
STATUS
to select a temperature filter
function otherwise press
MENU
ENTER
to continue.
Use the
STATUS
button to select 1 to 10° of
temperature change, then press
MENU
ENTER
to
continue.
or
Press
RECORD
to select a pressure filter
function from 1 to 10 PSI (0.0 to 1.0 BAR),
then press
MENU
ENTER
to continue.
This is the first data sample. Press
STATUS
to
advance forward through the data samples.
Press
RECORD
to go backwards through the
data samples.
This indicates the end of a data recording. Press
STATUS
to return to the beginning of the data
recording or
RECORD
to go to the last previous
data sample.
Press
MENU
ENTER
at any time to return to the Operating Mode.
SEND OUT ALL OF
THE TEMP DATA
SEND TEMP ON
X DEGREE CHANGE
SEND PRESSURE
ON X PSI CHANGE
TUE:14:22:25
73°F 37 PSI
REACHED THE END
OF RECORDED DATA