Owner's manual

Temperature/Pressure Adapter
10
This is an error message that appears when the
printer is not connected or turned off. Make sure
the printer cable is attached to both the printer
and the Service Logger and that power is
supplied to the printer.
This is an error message to alert the user that
the printer has run out of paper. Refer to the
owners manual of the printer for instructions
on paper replacement.
This is an error message which indicates that the
printer has not been set to ON LINE. Refer to the
owners manual for specific instructions on set-
ting the printer controls.
VIEWING RECORDED DATA
One of the features of the Service Logger is that recorded information may be
read directly on the display. The same filter functions that are available for
printing data are also available for reading data on the display. This allows the
user to let the Service Logger scan the recorded data and display only the in-
formation that is of interest to the user. Without this function the user would
have to manually scan a potential 4000 data samples to find the information of
interest.
Press and hold
MENU
ENTER
until this display
appears. The actual recording rate is
unimportant.
Press
MENU
ENTER
again to cycle to the next
screen. As before, the scale does not pertain to
the viewing function.
This is where the viewing function is accessed.
Press
STATUS
or
RECORD
to access this
menu.
Press the
RECORD
button once to scroll to this
function.
PLEASE CONNECT
THE PRINTER
PRINTER IS OUT
OF PAPER
PRINTER IS NOT
ON LINE
RECORDING RATE
XX HR EVERY XX SEC
TEMPERATURE SET
TO FAHRENHEIT
PUSH MENU TO RUN
OTHERS TO PRINT
READ RECORDED
DATA FROM SCREEN