User Manual

13
PRODUCT DESCRIPTION
About this cooktop:
This cooktop has been designed with a power limiter to ensure the cooktop does not exceed
2200W, allowing it to be plugged in to a standard 10amp power socket.
Note: if hardwiring, the power limitations will remain.
Using the cooktop:
Maximum of one or two zones used in conjunction will provide optimal results.
As the cooktop is equipped with a power limiter, when more zones are turned on the power
level will change for each zone. See below explanation:
 Use any one zone at full power (level 9)
 Use any two zones in conjunction at max power level 7 for both zones (eg. Zone 1 & 2, Zone 1
& 3 etc.)
 Use any three or four zones in conjunction and the max power level will be as follows:
o Zone 1 – power level 2
o Zone 2 – power level 3
o Zone 3 – power level 4
o Zone 4 – power level 5
Below table shows approximate times to boil 1 litre of tap water:
Power level 1500w Zone 2000w Zone
9 Under 5 min
(onsite testing 4min 43sec)
Under 3min
(onsite testing 2min 54sec)
7 Under 7 min
Onsite testing 6min 15sec)
Under 6 min
(onsite testing 5min 40sec)
Note – these results are indicative only, results may vary depending on users cookware and
water temperature.