Instruction Manual Induction Cooktop Model OCI64B
Thank you for purchasing an Omega appliance Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a welcome addition to the family. Omega caters to style-savvy customers who look for balance between stunning form and clever function. This means a combination of sleek, chic, sophisticated design yet effortless functionality. And we source from the best. The best craftsmanship. The best innovation. From the best international design-houses.
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. Due to continual product development, Omega reserves the right to alter specifications and appearances without notice.
Important Safety Warnings IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Important Safety Warnings 20. The appliance must be installed and put into operation by an authorised technician under the conditions provided by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might occur due to faulty installation. 21. Damage can occur to bench tops if pots and pans are allowed to overlap the bench top. This can result in heat being transferred to the bench top. Ensure that correct sized pots & pans are used.
Appliance Details ELECTRICAL DETAILS: COOKTOPS: Rated Voltage: Single phase 220-240Vac 50Hz, 3-phase 380-415Vac 50Hz 7400W COOKTOP – Directly wired to mains supply This information can be found on the rating plate (identification plate) affixed to the underside of the appliance.
Installation Instructions ELECTRICAL CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility.
Installation Instructions The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the ambient temperature of the room it is located in, during periods of use. The power supply to the appliance must be cut off before any adjustments or maintenance work is done on it. PREPARATION FOR INSTALLATION AND USE Manufactured with best quality parts and materials, this modern, functional and practical cooktop will meet your needs in all respects.
Installation Instructions INSTALLATION OF BUILT IN COOKTOP In order to prevent leakage of any liquids on the counter, a special sealing tape is supplied together with your cooktop. Apply this seal around the bottom edge of the cooktop (see below). The brackets are installed to hold the cooktop in place. Cut out a hole in the bench top as shown below. Place the cooktop (controls to the front) in the hole and fix in position using the brackets.
Installation Instructions If there is access to the cooktop base (for example, through a cupboard), a board must be placed a minimum of 30mm below the cooktop that prevents anyone from touching the cooktop base.
Operating Instructions The basic layout of the induction cooktop is shown in the diagram below. The induction cooktop appliance is operated by touching buttons, with the functions confirmed by LED displays and acoustic signals. Turning On and Turning Off the Cooktop Appliance NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel containing food on the appropriate cooking zone.
Operating Instructions The Boost Function The Boost function is available at each cooking zone. It is used to speed up the initial heat up time (say boil a pot of water). Select a cooking zone and set the Heat level. While the decimal point on the display is lit, press the Boost button. The display will alternate between “P” and the heat setting.
Operating Instructions Operating Time Limitation The cooktop control has a limitation on the operating time. If the heat setting for a hotplate has not been changed for a certain time, then the hotplate will turn off automatically (a “0” is displayed for 10 seconds, then the residual heat sign “H” is displayed). The limit of the operating time depends on the selected heat setting. Heat settings 1-2: 6 hours. Heat settings 3-4: 5 hours. Heat setting 5: 4 hours. Heat settings 6-9: 1.5 hours.
Cleaning NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The appliance should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use plastic, plastic coated or aluminium cooking equipment on this appliance. CLEANING THE COOKTOP All cookware used on this appliance should be rated for induction cooking by the manufacturer.
Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions Australian Customers Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
1
