User Manual

14 15
Specialty drying function
When the time programme is selected, the 【Time】 button can be used to adjust the drying time in
Used to adjust the dryness level of the laundry. The level has four grades .
The drying time increases 3 minutes in every grade.
2. Instruction of the Time function【 】
10 min. steps. The maximum time is 150 min.
Specialty drying function
4. Instruction of the function【My Cycle】
Used to define and save your favorite proragmmes that are used frequently.
(1).Use the programme selector to select the required programme and other drying functions.
(2).Press and hold the 【Intensity】 button for 3 seconds until the display flashing and the required
(3).Except the 【Cotton Iron】【Delicate】【Synthetic Iron】 【Wool】【Time】, all the other
(2).Press the 【Intensity】 button repeatedly to select the drying time.
(1).The intensity function can be activated only before the programme start.
(3).Turn the programme selector to the 【My Cycle】 position, you can start your favorite proragmmes.
1. Instruction to the drying procedure【Delay】
Steps in details
(1).Load your laundry and make sure the machine door is closed.
(2).Press the 【On/Off】button,then to turn the programme selector knob and select a desired
(3).You can select the 【Anti-Crease or 【Signal】functions according to your 】 need.
(4).To press the 【Delay】 key.
(5).Continue to press the 【Delay】to select the delay time.
(6).After the 【Start/Pause】 key is pushed, the dryer is at the run condition. The drying procedure
will be automatically performed when the delay time is over.
(7).If you push the【Start/Pause】button again, the delay function will be paused.
(8).If you want to cancel the “Delay” function, please press the 【On/Off】button.
programme.
3. Instruction of the Intensity function【 】
programmes can be setted the 【Intensity】 function.
programme has been saved.
If you want to change the 【My Cycle】 settings, repeat the steps (1) and (2).
To delay the drying programme from 0 hour to 24 hours. The delay time means the programme
will start after x hours. When the delay programme starts, the time starts to decrease on the
display and the icon blinks.
Specialty drying function
(1).This machine incorporates a special child safety lock, which can prevent children from carelessly
(2).When the dryer is at the operation state, press the【 】and Anti-Crease 【Signal】buttons at the
same time for over 3 seconds to start child lock function. When child lock function is set, the display
8. Instruction of the Child Lock feature【 】
pressing keys or making the faulty operation.
time for over 3 seconds to release the child lock function.
start state of the child lock, the【Anti-Crease】and 【Signal】buttons shall be pressed at the same
will show “ ” icon and no key can effect to the dryer except 【On/Off】button. Under the
7. Instruction of the Anti-Crease function【 】
At the end of the drying cycle, the anti-crease operation time is 30 minutes (default ) or 120 minutes (selected).
The 【Anti-Crease】 light shall illuminate when the anti-crease function is selected. This function
prevents the laundry from creases. The laundry can be removed during the anti-crease phase. Except
【Cool】,【Refresh】and 【Wool】, all the other programmes have this function.
5. Instruction of the 【Lamp】
The lamp inside the drum will lighten about 3 minutes when the button pressed or 1 minute the door
6. Signal【 】
Set up the buzzer on or off. In general condition, the buzzer is on. Please press it if needed.
When the buzzer on:
(1) The dryer will give the leading sound if press the extra function buttons.
(2) If the dryer is running, rotate the function choosing knob, the dryer will remind the operator
it is an invalid choose.
(3) When the drying programme is done, the buzzer will also remind the user.
opened.