MMC500CCommercialManualEFS081221email 1631791073543

TROUBLESHOOTING

Please troubleshoot using the details below before contacting Omega Customer Service

for repair or service. When contacting Omega for after-sales service, please have the

manufacturer’s serial number or bar code available.

The Appliance Does Not Work

• Make sure the power cord is plugged in correctly.

• Make sure the juicer is assembled correctly. If the right latch arm is not locked into

place, the appliance will not operate.

• Make sure the appliance is assembled according to the instructions in this manual.

Refer to the instructions.

• If the appliance still does not work, please contact Omega Customer Service for

additional support.

The Appliance Stops During Normal Operation

• Check for large pieces of food stuck in the appliance.

• If the appliance still does not work, please contact Omega Customer Service for

additional support.

Fine Lines or Scratch Marks

• This is normal. Do not be concerned. These are molding marks resulting from the

normal manufacturing process.

Juice Leaks Over the Base

• Check to make sure a cup is properly located under the juice spout.

• Do not force too much food into the juicer. Push food gradually for extraction.

• Check to make sure the pulp receptacle bin is properly placed behind the motor

case housing.

Juicer Shakes when In-Use

• This is normal as the strainer basket rotates. It is not a malfunction. Hard ingredients

such as carrots, potatoes, radishes, beets, etc. may cause shaking more so than soft

ingredients.

• Depending on the rmness of the ingredient, there may be a more pronounced

shaking of the motor.

• Slight shaking may be caused by the motor.

Online: www.OmegaJuicers.com/contact-omega-juicers