Owner's manual

19
4.3.3 Configuration
Click on , the following page should appear.
Figure 4.9 Configuration
Below are the definitions of terms used in the Configuration Page.
A) Sensor No.
Clicking on the No. 1
or 2 allows you to modify the Sensor Parameters (See Section
4.3.4 for more details).
Secured
Applet: If checked, the LOGIN password is required to open “Read Sensor”
and “Chart” pages.
T
itle: editable field which is the page title on the “Read Sensor” and “Chart” pages.
No. Sensor Name Reading Offset
Display
Units
Remote
Format
Remote End Char
(HEX)
1
2
Temperature
Pressure
SRTC
SRH#
C
PSI
T0000.0C
P0000.0P
0D
0D
0000.0
0000.0
CONFIGURATION
http://192.168.1.200
CONFIGURATION
Terminal Server
Remote Access (Tunneling)
Take Readings
Update
Remote IP Address Remote Port Remote Access
Title
TCP/UDP Server Type Number of Sockets
Port
02000
5Command
Forward CR
Secured Applet
disableTCP
02000
disable0.0.0.0
Click on Sensor No. on the left to modify Sensor Parameters.
Main Menu
Production
Configuration
A
B
C