Owner's manual

 Flow equipment should not be used for monitoring OXYGEN unless specifically cleaned and
prepared for such application. For more information, contact Omega7.
 If the valve is left in the active mode for an extended period of time, it may become warm or
even hot to the touch. Use care in avoiding direct contact with the valve during operation.
 To protect servicing personnel it is mandatory that any instrument being serviced is completely
purged and neutralized of toxic, bacteriologically infected, corrosive or radioactive contents.
 Use of the FSV valve in a manner other than that specified in this instruction sheet, may impair
the protection provided by the equipment.
8
4-40
SOCKET
SCREW
SPIDER
SPRING
STEM
SEAT-VITON
INSERT
ORIFICE
O-RING
BLOCK
CORE
SPIRAL SPRING
COMPRESSION
SPRING
O-RING
O-RING
ADJUST.
SCREW
VALVE
BODY
05-19-2006
GUARD
ASSEMBLY
NUT
Omega7 reserves the right to change designs and dimensions at its sole discretion at any time without
notice. For certified dimensions please contact Omega7.