Cov lus qhia

CRYOGENIC ACCESSORIES – Recommended for proper installation and use of DT-470/471/670/671 SD sensors:
Stycast
®
Epoxy 2850FT (P/N 9003-020, 9003-021): Permanent attachment, excellent low temperature properties, poor
electrical conductor, low cure shrinkage.
Apiezon
®
N Grease (P/N 9004-020): Low viscosity, easy to use, solidifies at cryogenic temperatures, excellent lubricant.
IMI 7031 Varnish (P/N 9009-002): Nonpermanent attachment, excellent thermal conductor, easy to apply and remove.
Indium Solder (P/N 9007-002-05): 99.99% pure, excellent electroplating material, foil form.
90% Pb 10% Sn Solder (P/N 9008-001): Greater lead content, for higher temperature applications no greater than 200 °C.
RMA Soldering Flux (P/N 9008): Variety of types, refer to Lake Shore Product Catalog for details.
Phosphor-Bronze Wire (P/N 9001-00X): Available in single, duo, and quad strands, no magnetic attraction, low thermal
conduction.
Manganin Wire (P/N 9001-00X): Low thermal conductivity, high resistivity, no magnetic attraction.
Heat Sink Bobbin (P/N 9007-900 Large, 9007-901 Small): Gold-plated oxygen-free high-conductivity (OFHC) copper
bobbins.