Owner's manual

SECTION 4. CONFIGURING THE METER

4.1 SELECTING THE INPUT RANGE (INPT)

Refer to Table B-2 for a summary list of menu configuration.

To select your appropriate input range, follow these steps:

1. Press the MENU button. The meter flashes “InP”.

2. Press the ¢/TARE button. The meter flashes one of the following:

* 0 - 10 (for 0-10 volt)

* 4 - 20 (for 4-20 mA)

* 20 - 4 (for 20-4 mA)

* 0 - 5 (for 0-5 volt)

* 1 - 5 (for 1-5 volt)

3. Press the ¢/TARE button to scroll through available choices.

4. Press the MENU button to store your choice. The meter momentarily

shows “StOr”, followed by “dEc.P” (Decimal point).