OMEGA PRODUCTS, INC. 3355 ENTERPRISE AVENUE, SUITE 160 FORT LAUDERDALE, FL 33331 PHONE: 877.368.2797 FAX: 954.202.
INSTRUCTION MANUAL Eat well, drink well and live well with Omega www.omegajuicers.
BLENDER SAFETY DANGER Electricity GENERAL Caution DANGER Risk of Electrical Shock DANGER Keep Hands Clear WARNING WARNING Electrical Shock Hazard Moving Parts! Plug into a grounded outlet. Do not remove ground. Always cover the lid on the container when blending. Do not put hands, spoons or other utensils container when blending. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire or electrical shock.
TABLE OF CONTENTS Specifications Important Safeguards Blender Operation Care and Cleaning Control Panel Blade Agitator Assembly Troubleshooting Maintenance 3 4 5 6-7 8 8 9 10 3
SPECIFICATIONS BL420 BL440 BL460 Shipping Dimensions: 17.5” W x 10” D x 13.75” H 440mm W x 250mm D x 350mm H Power Requirements: Volts: 120 VAC Amps: 11.5 Amp Hz: 50-60 Shipping Weight: 15 lb 6.8 kg Container: 64 Oz. / 1800ml 82 Oz.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 14. Screw on locking ring firmly. Injury can result if moving blades accidentally become exposed. 1. Read all the instructions before using the blender. 15. Always operate blender with lid in place. 2. Plug into a grounded outlet. 16. When blending hot liquids, place a hand towel over the cover. Do not fill blender container beyond 2/3 full.
BLENDER OPERATION To operate the blender, proceed as follows 1. For the first time user, wash the container assembly, including the lid, before use. (Refer to “Cleaning Instruction”) Do not put the container assembly & blender base assembly in the dishwasher. 2. Place the blender on a dry, clean, level surface, and be sure it is set to off. 3. Place the container onto the blender base. Make sure it rests securely on the base. 4. Plug the blender into an electric outlet. 5.
CLEANING OPERATION Omega blender container parts are corrosion resistant, sanitary and easily cleaned. Do not put the container assembly & blender base assembly in the dishwasher. 1. Before first use and after every use, separate container parts from the base 2. Add cleaning solution to the container. Use washing solution of tepid water (less than 115°F/46°C) and a non-sudsing detergent. Use the recommended amount of detergent. 3.
CAUTION & SAFEGUARDS 1. To protect against risk of electrical shock, do not put motor base in water or other liquid. 2. Unplug the power cord from the wall outlet when the unit is not in use, before putting on or taking off parts, and before cleaning other than washing the container. 3. Never contact moving parts. 4. Do not use outdoors. 5. Do not let the power cord hang over edge of table or counter, or touch hot surfaces. 6.
CONTROL PANEL MODEL CONTAINER BL420/422 64 Oz. / 1800ml On/Off Switch High/Low Switch CONTROLS BL430/432 82 Oz. / 2300ml On/Off Switch High/Low Switch BL440/442 64 Oz. / 1800ml Off/Low/High Knob Pulse Switch BL450/452 82 Oz. / 2300ml Off/Low/High Knob Pulse Switch BL460/462 64 Oz. / 1800ml On/Off Switch Variable Speed Knob Pulse Switch BL470/472 82 Oz. / 2300ml On/Off Switch Variable Speed Knob Pulse Switch BL480/482 64 Oz.
Lid Separate the lid and plug, then wash in warm soapy water. Rinse clean under running water and dry. Reassemble before use. Container 1. To clean: Fill pitcher 1/4 full with warm water and add 2-3 drops of dish soap. Return container to motor base and firmly position the two part lid. Run machine for 30 seconds. Empty container. Repeat this step.
MAINTENANCE INSPECT THE BLENDER AND ITS VARIOUS PARTS AND REPLACE AS FOLLOWS: Daily 1. Unplug the blender and remove the container from the base. 2. Inspect the container blades for wear, nicks, and broken or loose blades. Replace if necessary. 1. Unplug the blender. Weekly Quarterly 2. Inspect the power cord insulation and power plug for cracks. Refer to “Technical Service” for repair or replacement. 1.