Operation Manual

Lid

Separate the lid and plug, then wash in warm soapy water. Rinse clean

under running water and dry. Reassemble before use.

Container

1. To clean: Fill pitcher 1/4 full with warm water and add a couple of

drops of dish soap. Return container to motor base and firmly position

the two part lid. Run machine for 30 seconds. Empty container. Repeat

this step.

Troubleshooting

Problem Probable Cause Probable Solution

Loud noise from

the container

• Container blades

do not spin

• Increased vibration

• Leaking from

bottom of container

• Broken or worn drive

socket. Replace drive

socket.

• Check blade assembly

for damaged compo

nents and replace.

• Tighten retainer nut on

the bottom of the

container

Machine starts

then shuts off

• Motor

• Reset button

• Depress reset button

• Call Omega Customer

Service

Machine starts

then shuts off

• Power failure

• Power supply cord

damage

• Check to make sure

there is power to the

machine

• Check the power

supply cord and the

connection to the

power outlet