- OMEGA Ethernet/Internet-Based User's Guide

5-2 PostView NetScan User’s Manual
Introduction
PostView is an independent program that allows you to view waveforms recorded by various data
acquisition programs. As the data file is being created, a descriptor file used by PostView is also created.
PostView Control Options
1
= Mouse, = Arrow Keypads , = PageUp/PageDown Keypads
1 Group Select
,
,
or
12 Multiply (x2)
2
,
or
[
spacebar
]
2 Open
,
or Ctrl+O
13 Value at Marker
2
-------------
3Print
,
or Ctrl+P
14 Offset
2
, ,
or
type-in
4 Setup
,
or Ctrl+S
15 Units/Division
2
, ,
or
type-in
5 Zoom Out 16 Chart Min. Scale
Value
2
Setup Dialog Box
6 Zoom In 17
Divide (
÷
2)
2
,
or
[
spacebar
]
7 AutoScale 18 Time Stamp
Hours: mins: seconds. Tenths
Time stamp can be
relative
or
absolute
.
Default is
relative
time stamp.
8 Show Grid
,
Ctrl+G
19 Scroll
9 Show Markers
,
Ctrl+K
20 Access Chart Setup
Right-click to access
edit menu for selected
chart and channel.
10 Chart Max
Scale Value
2
Setup Dialog Box 21 Number of Samples
Displayed
Automatic indication of
no. of samples per chart
11 Channel
Selection
2
,
or
22 Time at Marker Indicates time at marker
position.
1
Note:
For keypad options, first use the
Tab
key to “tab over” to the desired control item. For example,
you can use the tab key to highlight the Group Select (item 1), then use any of the following 3
methods to obtain the desired group: Ctrl+G, keypad arrows, or PageUp/PageDown keys.
2
Note
: Items 10 through 17, and item 22 are discussed in the section,
PostView Channel Information
Region
, page -5.
3
Note
: Toolbar button functions are discussed on page -4.
4
Note
: Ctrl+J will show the software version number.