User manual

DaqBook and DaqBoard Configuration
There are no hardware configuration setups internal to the DaqBook or DaqBoard required for the DBK23.
LogBook Connection
Connect the P2 digital I/O port of the LogBook to the P2 connector of the DBK23 using an accessory
cable. Select up to 8 positions for a total of 192 programmable isolated inputs.
Software Setup
Reference Notes:
o DaqView users - Refer to chapter 3, DBK Setup in DaqView.
o LogView users - Refer to chapter 4, DBK Setup in LogView.
Note: Refer to the full-page table on the next page for valid hex codes.
DBK23, pg. 4 879795 DBK Option Cards and Modules