User manual
Channel and Card Address Selection 
The lower and upper channels on the DBK16 are multiplexed into one of 
the channels (0 to 15). The base channel (that the DBK16 is multiplexed 
into) is set by the shunt jumper on the16×2 header designated JP1 (see 
previous figure, DBK16 Board Layout). 
Each base channel can have up to 16 expansion channels multiplexed into 
it. Since the DBK16 represents two expansion channels, eight DBK16 
cards can be multiplexed into each base channel. To distinguish channels, 
there is a card address bank of three switches on each DBK16. These 
switches are binary-weighted with eight possibilities (0-7). 
Base 
Channel 
First Expansion 
Channel 
Number (N) 
 0  16 
 1  32 
 2  48 
 3  64 
 4  80 
 5  96 
 6  112 
 7  128 
 8  144 
 9  160 
10 176 
11 192 
12 208 
13 224 
14 240 
15 256 
DIP Switch Setting  Card Channels (n) 
C  B  A  Upper  Lower 
Open Open Open  1  0 
Open Open Closed 3  2 
Open  Closed Open  5  4 
Open  Closed  Closed 7  6 
Closed Open  Open  9  8 
Closed Open  Closed 11  10 
Closed  Closed Open  13  12 
Closed  Closed  Closed 15  14 
The switch settings are: open = 0, closed = 1 (enabled). The weights (when closed) are: A = 1, B = 2, C = 4. 
The table above shows the switch settings. The table to the right lists card channels (n) with respect to the base 
channel. 
Since the LogBook or the Daq device has sixteen base channels, up to 128 DBK16s can be used, providing a 
maximum of 256 channels. To keep track of all base and expansion channels, the base channels are designated 
0 to 15 and the expansion channels are designated 16 to 271. Channel 16 is the first channel on the first 
expansion board (lower channel on card address 0 with JP1 set to CH0). Channel 271 is the last channel on the 
last expansion board (upper channel on card address 7 with JP1 set to CH15). 
To calculate the actual input channel, use the above tables and add the applicable “N” and “n.” The result is the 
expansion channel number. This number is needed when writing a program to read from that particular 
channel. For more information on multiplexing, refer to the Signal Management chapter. 
DBK16, pg. 8  879895  DBK Option Cards and Modules 










