User’s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: omegamanual.
OMEGAnet® Online Service omega.com Internet e-mail info@omega.com Servicing North America: U.S.A.: ISO 9001 Certified Canada: One Omega Drive, P.O. Box 4047 Stamford, CT 06907-0047 TEL: (203) 359-1660 e-mail: info@omega.com 976 Bergar Laval (Quebec) H7L 5A1, Canada TEL: (514) 856-6928 e-mail: info@omega.ca FAX: (203) 359-7700 FAX: (514) 856-6886 For immediate technical or application assistance: U.S.A.
z LARGE LED DISPLAY READABLE TO 180 FEET C UL R z VARIOUS ANALOG INPUT MODULES; DC VOLTAGE AND CURRENT PROCESS SIGNALS TRUE RMS VOLTAGE AND CURRENT THERMOCOUPLE OR RTD STRAIN GAGE/BRIDGE US LISTED IND. CONT. EQ.
8. MODULE INSTALLATION: 24-pin shrouded connector on LDP63100 engages connector on input module upon installation. Shroud ensures proper alignment by providing a lead-in for the module connector. 9. CONNECTIONS: Wiring connections are made to the LDP63100 terminal block and input module via high compression cage-clamp terminal blocks. Input Module Wiring: Instructions are provided in the included bulletin. LDP63100 Terminal Block Wiring: Wire Strip Length: 0.3" (7.
1.0 ASSEMBLING THE DISPLAY WARNING: Exposed line voltage exists on the input module main circuit board and the option cards. DO NOT apply power to the module OR load circuits until the module is properly installed in the LDP63100 case. CAUTION: The input module main circuit board and the option cards contain static sensitive components. Before handling the module or the cards, discharge static charges from your body by touching a grounded bare metal object.
2.0 INSTALLING THE DISPLAY DISPLAY INSTALLATION The LDP63100 display is intended to be mounted into a panel or enclosure. The display is DIMENSIONS In inches (mm) provided with a gasket to provide a water-tight seal. The recommended minimum panel thickness for NEMA 4/IP65 sealing is 0.060" (1.57 mm). For panel mounting, prepare the panel cut-out to the dimensions shown in Figure 3. The supplied template may be used to mark the cut-out and hole locations on the panel.
3.0 WIRING AND PROGRAMMING THE DISPLAY Once assembled, the LDP63100 has all the same functions and capabilities of our DP63500, DP63600, and DP63700 Series Intelligent Panel Meters. Therefore, you will find the appropriate meter information packed with the LDP63100. Simply follow the instructions to wire and program the display for your application. Note: Both the LDP63100 and the input module require power.
NEMA 4/IP65 LARGE DISPLAY ENCLOSURE & SHROUD FOR LDP63100 z LIGHT-WEIGHT ALUMINUM CONSTRUCTION z COMPLETELY SEALED FOR WASH-DOWN z MOUNTING CHANNELS FOR VERSATILE INSTALLATION DESCRIPTION The NEMA 4/IP65 Large Display Enclosure is designed to protect the LDP63100 from dust and hose directed water, when properly installed. This light-weight all aluminum unit utilizes welded seams and neoprene gaskets to meet NEMA 4/IP65 requirements.
ASSEMBLY AND INSTALLATION PROCEDURE 1. Install the two mounting channels on the enclosure housing using the four #8-32 screws provided and then insert the strut nuts (provided). Invert enclosure if base mounting. 2. If the wiring is to be routed through the housing, make sure that the mounting channels are oriented properly before drilling, so the Display will be readable. Wiring is generally brought into the right side of the housing or rear panel, closest to the terminals of the input module.
PART NUMBER INFORMATION DESCRIPTION PART NUMBERS Temperature Input, 85-250 VAC power LDP63100-T Universal DC Inputs, 85-250 VAC power LDP63100-DC True RMS AC Current and Volt Inputs, 85-250 VAC power LDP63100-AC Process Input, 85-250 VAC power LDP63100-E Strain Gage Input, 85-250 VAC power LDP63100-S ACCESSORIES DESCRIPTION PART NUMBERS NEMA 4 Enclosure LDP6-ENC12 NEMA 4 Enclosure With Shroud LDP6-EN/SH Programming Remote LDP6-PGM Shroud LDP631-SHR
WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal two (2) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit malfunctions, it must be returned to the factory for evaluation.
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.
