User’s Guide Shop online at www.omega.com e-mail: info@omega.
OMEGAnet® Online Service www.omega.com Internet e-mail info@omega.com Servicing North America: USA: ISO 9001 Certified Canada: One Omega Drive, P.O. Box 4047 Stamford CT 06907-0047 TEL: (203) 359-1660 e-mail: info@omega.com 976 Bergar Laval (Quebec) H7L 5A1 TEL: (514) 856-6928 e-mail: info@omega.
OMEGA FP-5060 Series Micro-Flow Sensors SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifications. 3. Do not install/service without following installation instructions (see sensor manual). 4. Wear safety goggles and faceshield during installation/service. 5. Do not alter product construction. 6. Failure to follow safety instructions could result in severe personal injury! 1.
3. Surface Mount Instructions 2 Remove sensor then use correct screws for panel material. #6 or M3 metric screws recommended 1 120° Mounting surface (top), 68 mm (2.68 in.) bolt circle Mounting surface Mounting surface (side) 4. Fitting Installation CAUTION: • Maximum pipe fitting torque: 10 ft - lbs (13 N m). • DO NOT overtighten. Failure to observe torque specification may permanently damage sensor ports.
6. Specifications General Flow range: 5061 and 5062: 5063 and 5064: Linearity: Repeatability: Connections: Cable length: Cable type: Weight: Electrical Supply voltage: 5 to 24 VDC, regulated Supply current: 10 mA max. Output type: Open-collector NPN transistor, 10 mA max sink 0.11 to 2.6 lpm (0.03 to 0.7 gpm) 1.13 to 12.11 lpm (0.3 to 3.2 gpm) ±1.2% of full range ±0.5% of full range ¼ in. NPT (male) or ISO 7/1 - R¼ (male) 8 m (25 ft.), can splice up to 300 m (1000 ft.) max.
NOTES: page 6 OMEGA FP-5060 Series Micro Flow Sensor
WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit malfunctions, it must be returned to the factory for evaluation.
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at www.omega.
