User Manual

3
OPERATING INSTRUCTIONS
Connect the power plug to a suitable outlet.
Select the desired speed using the Speed control:
0 – Device Off
1 – Low speed
2 – Medium speed
3 – High speed
The incline of the fan head can be adjusted by tilting it backwards or forwards. The fan head can then be locked
into position, which is indicated by an audible click.
To adjust the height, loosen the height adjustment screw, slide the upper section to the required height and re-
tighten the adjustment screw.
Oscillation
The fan head is capable of oscillating in a 75° arc.
To have the fan head oscillate, pull the pin located at the back of the fan head up.
To stop oscillation, simply push the pin down.
MAINTENANCE
IMPORTANT: Before cleaning turn the fan off and unplug from the power supply.
• To clean the fan, use a soft cloth to wipe off any dust. If the fan is very dirty use a damp cloth and wipe
dry.
• Do not use any cleaning detergents, sprays or other chemicals, as they will damage the fan.
• Store the fan in the original packing in a ventilated dry area.
• The motor bearings are permanently sealed and do not require additional lubrication.