Data Sheet

Omeg Limited
RH19 1RJ
Registration No. 600441
http://www.omeg.co.uk
[e-mail]
Tel: [phone]
This information is supplied in good faith but the customer is politely reminded that it is their responsibility to check the suitability of
our products for their particular application, production techniques and processes. Please note that all dimensions are for reference
purposes only and, as it is the Company's policy to continuously improve our products, we reserve the right to incorporate changes
without notice. Please read our terms and conditions before purchasing our products. Published 01-04- 2018
P20 Spindles
The P20 spindles are plastic and fixed i.e. not removable, unless otherwise stated and they are
available in three diameters:
 6.0mm Diameter
o Cylindrical (Type F1)
o 4.0 x 12mm Flat (Type F2)
o 5.0 x 15mm Flat (Type F3)
o 5.0 x 10mm Flat (Type F4)
o 4.6mm x 15mm Flat (Type F11)
 4.0mm Diameter
o Cylindrical (Type F21)
o 3.0 x 8.5mm Flat (Type F22)
o 3.0 x 13.5mm Flat (Type F23)
o Cylindrical (Type M21 - Metal)
o 3.0 x 8.5mm Flat (Type M22 - Metal)
o 3.0 x 13.5mm Flat (Type M23 - Metal)
 6.35mm Diameter
o Cylindrical (Type F41)
o 5.5 x10mm Flat (Type F42)
o 5.5 x 15mm Flat (Type F43)
 Splined Spindle - 6.0mm dia. 18 teeth
 Dual Concentric
o Flatted/Slotted (Type M15 - Metal)
o Cylindrical (Type M16 - Metal)