Cheese Grater Model GR-IT-2983-B Item 39498 Instruction Manual Revised - 10/27/2021 Toll Free: 1-800-465-0234 Fax: 905-607-0234 Email: service@omcan.com www.omcan.
Table of Contents Model GR-IT-2983-B Section Page General Information --------------------------------------------------------------------------- 3 - 4 Safety and Warranty --------------------------------------------------------------------------- 4 - 6 Technical Specifications -------------------------------------------------------------------------- 6 Installation --------------------------------------------------------------------------------------- 6 - 7 Operation ------------------------------------
General Information Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing.
General Information Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité. Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
Safety and Warranty • • • • electrocution. Do not work products that are bigger than what can be totally contained in the feeding inlet. Do not wear clothes that do not comply with safety regulations. Consult your employer for safety regulations and the safety devices required. Do not use the machine if it is not working correctly. Before starting the machine make sure that any dangerous condition has been appropriately eliminated.
Safety and Warranty Please see https://omcan.com/disclaimer for complete info. WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
Installation MOVING THE MACHINE ATTENTION! Lift the machine with a forklift of suitable capacity. Check the stability and positioning of the weight on the forks, especially along uneven, slippery or inclined paths. When moving the machine keep the load as low as possible to guarantee greater stability and visibility. Stabilize the grip by widening the forks of the forklift.
Operation START UP AND STOP CHECKING THE CORRECT ELECTRICAL CONNECTION ATTENTION! Check that the feeding line corresponds to the value reported on the identification plate of the machine and that it is outfitted with an efficient floor plug. 1. Put the plug into the electrical outlet. 2. Set the differential switch in position “I”. The lit indicator, indicating that the machine is powered, must be illuminated. 3.
Operation CHECKING THE EFFICIENCY OF THE STOP PUSHBUTTON While the machine is connected to the power supply and the utensil is moving press the pushbutton. START UP • • Set the differential switch fitted upstream at “I”. The light indicator will light up, indicating that the machine is powered. Press the start pushbutton to start the machine. NOTE If the presser is in an “open” position the machine will not run, therefore it will have to be lowered.
Maintenance operations for scrapping. Therefore use companies specialized in trash disposal, separating the components according to material. Troubleshooting Problems The machine does not start. Causes The differential switch is not set at “0”. The presser is in a high position. The microswitch installed on the grater inlet does not work. The start pushbutton does not work. The electrical motor or the electronic card are faulty. 10 Solutions Put the switch at “I”. Lower the presser.
Parts Breakdown Model GR-IT-2983-B 39498 11
Parts Breakdown Model GR-IT-2983-B 39498 Item No. Description Position Item No. Description Position Item No.
Electrical Schematics Model GR-IT-2983-B 39498 13
Notes 14
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous.
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company.