Instruction Manual

A-JET
Precise and complex three dimensional parts become a
reality with the OMAX A-Jet.
The Intelli-MAX Software provides full control over the A-Jet,
including manual tilt and direction angle input.
3D FUNCTIONALITY
With the A-Jet, 3D parts are now possible on an abrasive waterjet.
The continuous precision 5-axis movement of the A-Jet cutting head allows
for detailed 3D shapes to be cut from a wide variety of materials. With the
combination of the A-Jet and the optional Rotary Axis, the OMAX JetMachining
Center becomes even more versatile, allowing for complex and challenging 3D
shapes to be cut, such as beveled pipe ttings.
OPTIONS
• Terrain Follower automatically adjusts to accommodate warped at plate
• Rotary Axis allows for complex 6-axis 3D parts and precision beveled pipe
ttings
• 0.030” Fusible Mixing Tube for ner kerf size*
REQUIREMENTS
• A bridge-style OMAX JetMachining® Center (for cantilever-style OMAX
JetMachining Centers, contact an OMAX sales representative for details)
• OMAX 9-axis PC-based controller
• OMAX Intelli-MAX 18 Software Suite or later for taper compensation
SPECIFICATIONS
• Positioning Accuracy: ±0.09° (±6 arc minutes)
• 0.042” High Angle Fusible Mixing Tube standard
• Z-axis travel: 6” (152mm), up to 8” (203mm) when using shorter table slats in
the Catcher Tank
*Using the 0.030” size greatly reduces mixing tube life in exchange for higher
precision kerf size.
The A-Jet makes cutting bevels simple, and software controls
help to eliminate taper.
WWW.OMAX.COM
Made in the USA
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL [phone]
FAX [phone]
Specications subject to change without notice.
600050B January 2014