User Manual

STANDARD MODEL SPECIFICATIONS
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements
3-Phase, 380-480 VAC ±10%,
50-60 Hz
Noise Level
Below 80 dBA at one meter for
submerged cutting
Speed
180 in/min to 350 in/min
(4,572 mm/min to 8,890 mm/min)
Accuracy of Motion at 70˚ F
Ballbar Circularity
(Over 12")
±0.003”
(±0.076mm)
Repeatability
±0.002"
(±0.051 mm)
OPTIONAL ACCESSORIES
• EnduroMAX Pump P3060V,
P4060V, or P5060V
• DualPUMP Package (redundant dual
EnduroMAX option up to 100 hp)
• Tilt-A-Jet
®
Cutting Head
• Variable Speed SRS (VS-SRS)
• Collision Sensing Terrain Follower
(with Tilt-A-Jet only)
• Z-Axis Drill
• Precision Optical Locator (POL)
• Water-only MAXJET
®
5 for cutting
soft materials
• OMAX Mini MAXJET
®
5i Nozzle
Assembly
• Second MAXJET 5i with Motorized
Z-Axis and all necessary hard
plumbing (requires second Y-Axis
carriage)
• Manual Tilt Z
• DualBRIDGE second bridge option
• Laminar Filter
• Waterjet Brick Kit
• Rotary Axis
• Air and Water Conditioning Kit
• A-Jet
®
• Terrain Follower/A-Jet
®
• Material Holding Kit
• Laser Feature Finder
*Photos may show optional accessories. Optional accessories may reduce
travel. For a complete list of accessories, contact an OMAX sales representative.
Pumps are built to meet UL and CE specications. Contact OMAX for detailed
utility requirements.
80X SERIES
OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL [phone]
FAX [phone]
WWW.OMAX.COM
Made in the USA
2
YEAR
w arranty
l i mited
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
Specications subject to change without notice.
600045A June 2013
MACHINE DIMENSIONS
Footprint (with controller)
22’1” x 12’8” to 35’0” x 15’0”
(6,731 mm x 3,861 mm to
10,668 mm x 4,572 mm)
Weight (tank empty)
9,000 lbs to 13,000 lbs
(4,082 kg to 5,897 kg)
Height (with scissor plumbing) 12’0” (3,658 mm)
Operating Weight (with water in tank)
34,000 lbs to 54,000 lbs
(15,422 kg to 24,494 kg)
WORK ENVELOPE
X-Y Cutting Travel*
13’4” x 6’8” to 26’8” x 6’8”
(4,064 mm x 2,032 mm to
8,128 mm x 2,032 mm)
Z-Axis Travel* 8” (203mm)
Table Size
15’0” x 7’5” to 28’3” x 7’5”
(4,572 mm x 2,261 mm to
14,783 mm x 2,261 mm)
DRIVE DESCRIPTION
• Closed loop, digital drives
• Brushless servo motors
• Intelli-TRAX
®
drive technology with
linear encoders in X-Axis
• Precise Motorized Z-Axis
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.
80X
80X-1
80X-2
X-Y Cutting Travel: 13’ 4” x 6’ 8”
(4,064 mm x 2,032 mm)
X-Y Cutting Travel: 20’ 0” x 6’ 8”
(6,096 mm x 2,032 mm)
X-Y Cutting Travel: 26’ 8” x 6’ 8”
(8,128 mm x 2,032 mm)