Instruction Manual

PRECISION ABRASIVE WATERJET SYSTEMS
2652
Made in the USAWWW.OMAX.COM
OMAX 2652 JetMachining Center
The original OMAX JetMachining
®
Center, the 2652 is a popular xture in machine shops and fabrication facilities. The proven
OMAX technology leads to efcient production through fast and accurate cutting of complex parts out of most materials. With the
simple yet powerful Intelli-MAX
®
Software Suite and innovative optional accessories such as the Tilt-A-Jet
®
, the 2652 can quickly
switch from near net blank shape cutting to high precision machining.
FEATURES BENEFITS
• Fastest cutting speeds and best precision compared to any abrasivejet in
the industry and is backed by our exclusive Intelli-MAX
®
Software with real
world cutting data
• Programmable Motorized Z-Axis with a precision OMAX MAXJET
®
5i Nozzle
Assembly can boost cutting productivity and process efciency
• Tilt-A-Jet taper compensating abrasivejet cutting head
(available as an option)
• Precision X-Y Axis rigidly mounted to the cutting table
• Pre-loaded linear bearings and precision ball screws
• Easy operator access to the work area
• Low maintenance, high reliability scissor-style hard plumbing
• Drive system sealed against water, dirt, and grit
• High efciency Generation 4 EnduroMAX
®
pump systems available in 30,
40, or 50 hp with operating efciencies up to 90%
• Robust and accurate design for tight tolerance cutting and reliable operation
• Rapid Water Level Control for quiet and clean submerged cutting
• Optional Variable Speed Solids Removal System (VS-SRS) designed for
tough industrial use increases uptime through automated solids removal
• Shipped as a completely pre-assembled and factory-tested system
• Machines a wide range of materials and thicknesses, from metals to glass
• Does not create heat-affected zones or mechanical stresses
• No tool changes and minimal xturing reduces setup by 50% or more
• No additional water required for pump cooling
• Small, efcient footprint for minimal oorspace utilization
• Leaves behind a satin-smooth edge, reducing secondary operations
• No noxious gases, liquid and oils used in, or caused by, the machining process
• EnduroMAX pump technology delivers the highest nozzle horsepower in the
industry for faster and more efcient cutting
• Completes most work below 80 dBA
• Environmentally “green” system with quiet and clean operation with low
electrical consumption
• Highly robust and reliable pump design capable of over 1000 hours
between maintenance